Upgrade your factory audio system with a clean, high-quality adjustable signal for an aftermarket amplifier. The AudX ALOC2 converts speaker-level outputs into low-level RCA outputs, making it an ideal interface for adding amplification while retaining the factory head unit.
Key Features
2-channel speaker-level to RCA line output converter
Selectable 20V or 40V input range
Adjustable output gain up to 10 Vrms
Audio-sensing, DC-offset, or remote-wire turn-on options
Selectable 40-ohm load for factory systems that require a speaker load
Remote output for triggering an aftermarket amplifier
Clip LED helps set gain for a clean signal
Compact design: 3.937 x 3.07 x 1 in. (100 x 78 x 25.4 mm)
Built for Clean Integration
The ALOC2 is designed to connect to factory speaker outputs and deliver a high-quality RCA signal to your aftermarket amplifier. Its wide input range supports both standard and high-output factory amplified systems, while the adjustable gain and clip indicator help optimize output without unwanted distortion.
Choose the turn-on method that best suits your vehicle: audio signal detection, DC-offset detection, or a traditional remote turn-on wire. A built-in remote output can then activate your aftermarket amplifier.
Specifications
Specification | Details |
Channels | 2 |
Frequency Response | <10 Hz to >100 kHz |
Input Sensitivity | 2-20 Vrms / 4-40 Vrms |
Maximum Input Voltage | 40 Vrms |
Maximum Output Voltage | >10 Vrms |
THD+N | <0.01% |
Signal-to-Noise Ratio | >110 dBA at 10V output |
Operating Voltage | 10.5V-18V |
Current Draw | <250 mA |
Dimensions | 3.937 x 3.07 x 1 in. |
In the Box
AudX ALOC2 line output converter
Connection terminals
Owner’s manual
Installation Note
Professional installation is recommended. Disconnect the vehicle battery’s negative terminal before wiring, and confirm all connections match your vehicle and amplifier requirements.
